How to Install Loki from https://grafana.com/oss/loki/ on Clear Linux Latest

In this tutorial, you will learn how to install Loki from https://grafana.com/oss/loki/ on Clear Linux latest version. This tutorial assumes you have basic knowledge of Clear Linux command line interface.

Requirements

Before starting, make sure you have the following:

  • Clear Linux latest version
  • Access to terminal with sudo rights
  • Internet access

Installing and Configuring Loki

  1. Open a terminal and update your system by entering the following command:
sudo swupd update
  1. Install Loki by entering the following command:
sudo swupd bundle-add grafana-loki
  1. Once the installation is complete, start the Loki server by entering the following command:
sudo systemctl start loki.service
  1. Check if Loki server is running by entering the following command:
sudo systemctl status loki.service
  1. If Loki server is running, enable it to start on boot by entering the following command:
sudo systemctl enable loki.service
  1. Configure Loki by editing the configuration file:
sudo nano /etc/loki/local-config.yaml

  1. Customize your configurations and save the file.

  2. Restart Loki server to apply the new configurations by entering the following command:

sudo systemctl restart loki.service

Congratulations! You have successfully installed and configured Loki on Clear Linux. You can now start using Loki for logging and monitoring.