How to Install MTR on Clear Linux Latest

This tutorial will guide you through the process of installing MTR on Clear Linux Latest. MTR (My Traceroute) is a popular network diagnostic tool that combines the functionality of both traceroute and ping commands.

Prerequisites

Before we start, make sure you have the following:

• Clear Linux Latest installed on your system
• A terminal emulator or console

Installation Steps

1. Open your terminal emulator or console.

2. Update your system by running the following command:

   sudo swupd update
   

3. Install Git by running the following command:

   sudo swupd bundle-add git
   

4. Clone the MTR repository by running the following command:

   git clone https://github.com/traviscross/mtr.git
   

5. Change to the MTR directory by running the following command:

   cd mtr
   

6. Install the required dependencies by running the following command:

   sudo swupd bundle-add bison flex gcc glib zlib make
   

7. Configure MTR by running the following command:

   ./bootstrap.sh
   

8. Build MTR by running the following command:

   ./configure && make
   

9. Install MTR by running the following command:

   sudo make install
   

10. Verify that MTR is installed by running the following command:

    mtr --version
    

If MTR is installed correctly, you should see output similar to the following:

mtr 0.93
Copyright (c) 1998-2019 Matt Kimball, Darren Reed

Congratulations! You have successfully installed MTR on Clear Linux Latest.