How to Install Tinyproxy on Debian Latest

Tinyproxy is a lightweight HTTP/HTTPS proxy server that can be used to improve network performance by caching frequently accessed content. It's easy to install and configure on Debian and can be used to protect your privacy while surfing the web.

This tutorial will walk you through the steps of installing Tinyproxy on Debian Latest.

Prerequisites

Before you begin, ensure that your Debian system is up-to-date by running the following commands:

sudo apt update
sudo apt upgrade

Step 1: Install Tinyproxy

To install Tinyproxy on Debian, run the following command in your terminal:

sudo apt install -y tinyproxy

The above command installs Tinyproxy and all its dependencies.

Step 2: Configure Tinyproxy

After the installation is complete, you need to configure Tinyproxy to meet your needs. The main configuration file for Tinyproxy is located at /etc/tinyproxy/tinyproxy.conf. Open this file using your preferred text editor:

sudo nano /etc/tinyproxy/tinyproxy.conf

By default, Tinyproxy allows connections only from the localhost. If you want to allow connections from other machines, scroll down to the Allow section in the configuration file and add the IP addresses or subnets that you want to allow. For example, to allow connections from the 192.168.1.0/24 subnet, add the following line:

Allow 192.168.1.0/24

If you want to disable caching in Tinyproxy, set the MaxCachedBytes parameter to 0 as follows:

MaxCachedBytes 0

Once you are done editing the configuration file, save and close it.

Step 3: Start Tinyproxy

To start Tinyproxy, run the following sudo command in your terminal:

sudo systemctl start tinyproxy

To make Tinyproxy start at boot time, run the following command:

sudo systemctl enable tinyproxy

Conclusion

After following the above steps, you should have a functioning Tinyproxy installation. You can now use Tinyproxy to access the internet through the specified IP addresses or subnets.