How to Install Yeti-Switch on Elementary OS Latest

Yeti-Switch is an open-source project that provides voice-over-internet (VoIP) solutions for telecom operators and carriers. In this tutorial, we will show you step-by-step how to install Yeti-Switch on Elementary OS Latest using the command line.

Prerequisites

Before we get started, you will need the following:

• A computer running Elementary OS Latest
• A user account with sudo privileges
• A stable internet connection

Step 1: Update the System

Before we begin, we need to ensure that our system is up-to-date. Open the terminal by pressing Ctrl + Alt + T on your keyboard and run the following command:

sudo apt update && sudo apt upgrade -y

Step 2: Download and Install PostgreSQL

Yeti-Switch requires PostgreSQL to be installed on the server. To install PostgreSQL, run the following command:

sudo apt install postgresql -y

After installing PostgreSQL, start the PostgreSQL service:

sudo systemctl start postgresql

You can check the status of PostgreSQL by running:

sudo systemctl status postgresql

Step 3: Install the Required Dependencies

Now, we need to install the dependencies required by Yeti-Switch. Run the following command to install the dependencies:

sudo apt install git make gcc nginx unzip -y

Step 4: Download and Install Yeti-Switch

To download Yeti-Switch, open the terminal and run the following command:

git clone https://github.com/yeti-switch/yeti.git

After cloning the repository, navigate to the Yeti-Switch directory:

cd yeti

Now, we need to install Yeti-Switch. Run the following command:

sudo make install-yeti

It will take some time to install Yeti-Switch based on your system specifications. Once the installation is complete, create a configuration file for Yeti-Switch:

sudo make prepare-yeti-conf

Step 5: Configure Yeti-Switch

To configure Yeti-Switch, we need to update the configuration file. Open the configuration file using your preferred text editor:

sudo nano /etc/yeti/yeti.conf

Here, you can set the parameters for Yeti-Switch as per your requirements. Once you are done, save and close the file.

Step 6: Start Yeti-Switch

Finally, we can start Yeti-Switch by running the following command:

sudo systemctl start yeti

Now, Yeti-Switch should be running on your server.

Conclusion

In this tutorial, we have shown you how to install Yeti-Switch on Elementary OS Latest. We hope this has helped you set up Yeti-Switch and start using it for VoIP solutions. If you face any issues during the installation process, feel free to refer to the Yeti-Switch documentation for further assistance.