How to Install Flame on EndeavourOS Latest

Flame is an open-source program for visualizing and analyzing raw particle data from experiments. In this tutorial, we will guide you through the process of installing Flame on EndeavourOS Latest.

Prerequisites

Before we begin, make sure you have the following prerequisites:

• EndeavourOS Latest installed on your machine
• A terminal emulator
• Git installed on your system
• CMake installed on your system

If you do not have these prerequisites, please install them before proceeding.

Step 1: Clone Flame from GitHub

First, we need to clone the Flame repository from GitHub. To do this, open your terminal and run the following command:

git clone https://github.com/pawelmalak/flame.git

This will clone the repository into a subdirectory named flame.

Step 2: Build Flame

Next, navigate into the flame directory by running:

cd flame

Now, we need to build Flame using CMake. We will create a separate directory for the build files to keep our source directory clean. Run the following commands in your terminal:

mkdir build
cd build
cmake ..
make

This will configure the project with CMake, create the makefiles, and compile the program.

Step 3: Install Flame

After compiling Flame, we need to install it on our system. Run the following command in your terminal:

sudo make install

This will install Flame on your system.

Step 4: Run Flame

Now that Flame is installed, you can run it by typing the following command in your terminal:

flame

This will launch the Flame application, and you can then start analyzing and visualizing particle data.

Conclusion

That's it! You have successfully installed Flame on EndeavourOS Latest. You can now use Flame to analyze and visualize particle data from experiments. If you encounter any issues during the installation process, feel free to refer to the Flame documentation or seek help from the community.