How to Install PhpSysInfo on EndeavourOS Latest

PhpSysInfo is an open-source monitoring software that displays detailed system information in a web-based interface. Here's a tutorial on how to install PhpSysInfo on EndeavourOS Latest.

Step 1: Update Your System

Before we begin, let's make sure our system is up-to-date by running the following command:

sudo pacman -Syu

This will update the system and ensure that we have the latest packages installed.

Step 2: Install the Required Packages

The next step is to install the required packages for PhpSysInfo. Run the following command to install Apache web server, PHP, and other dependencies:

sudo pacman -S apache php php-apache net-snmp lm_sensors

Step 3: Download and Install PhpSysInfo

Next, we need to download and install PhpSysInfo. Follow these steps to do this:

Download the latest version of PhpSysInfo from the official website using the following command:
```
wget https://github.com/phpsysinfo/phpsysinfo/releases/download/v3.3.3/phpsysinfo-3.3.3.tar.gz
```
This will download the latest version of PhpSysInfo to your system.
Extract the downloaded file using the following command:
```
tar xvzf phpsysinfo-3.3.3.tar.gz
```
Move the extracted folder to the Apache web root directory using the following command:
```
sudo mv phpsysinfo /srv/http/
```
Ensure the web server has permissions to the phpsysinfo directory by running the following command:
```
sudo chown -R http:http /srv/http/phpsysinfo
```

Step 4: Configure Apache

Next, we need to configure Apache to serve PhpSysInfo. Follow these steps to do this:

Open the Apache configuration file using your favorite text editor. We'll use nano for this tutorial:
```
sudo nano /etc/httpd/conf/httpd.conf
```
Uncomment the following line to enable the PHP module:
```
LoadModule php7_module modules/libphp7.so
```

Add the following lines at the end of the file to enable serving PhpSysInfo:

<Directory "/srv/http/phpsysinfo">
   Options Indexes FollowSymLinks
   AllowOverride All
   Require all granted
</Directory>

Save and close the file by pressing Ctrl+X and then Y.
Restart the Apache web server using the following command:
```
sudo systemctl restart httpd
```

Step 5: Access PhpSysInfo in Your Browser

Finally, we can access PhpSysInfo in our browser. Follow these steps to do this:

Open your favorite web browser.
In the address bar, enter the following URL:
```
http://localhost/phpsysinfo
```
Press Enter to load PhpSysInfo.

You should now see detailed system information about your EndeavourOS Latest system in your browser.

Conclusion

In this tutorial, we've learned how to install and configure PhpSysInfo on EndeavourOS Latest. PhpSysInfo is a powerful tool that makes it easy to monitor system resources and diagnose issues.