How to Install Traefik on EndeavourOS Latest

Traefik is a modern and dynamic reverse proxy and load balancer that helps to manage incoming traffic to your web applications. In this tutorial, we will guide you on how to install Traefik on EndeavourOS Latest.

Prerequisites

Before you begin with the installation process, ensure that you have the following:

• A server running EndeavourOS Latest
• A user account with sudo privileges
• Basic knowledge of Linux commands

Step 1: Install Docker on EndeavourOS

Since Traefik is a container-based application, you need to have Docker installed on your server. Follow these steps to install Docker:

1. Open a terminal and update the package repository by running the following command:

   sudo pacman -Syu
   

2. Install Docker by running the following command:

   sudo pacman -S docker
   

3. Enable and start the Docker service using the following command:

   sudo systemctl enable docker.service
   sudo systemctl start docker.service
   

4. Verify that Docker is installed and running using the following command:

   sudo docker info
   

   This command should output information about your Docker installation.

Step 2: Install Traefik on EndeavourOS

Now that Docker is installed on your server, you can proceed with the installation of Traefik by following these steps:

1. Create a new directory to hold the Traefik configuration files:

   mkdir /etc/traefik
   

2. Create a new file named traefik.toml in the /etc/traefik directory:

   nano /etc/traefik/traefik.toml
   

3. Type or paste the following configuration into the file:

   defaultEntryPoints = ["http", "https"]
   [entryPoints]
     [entryPoints.http]
     address = ":80"
       [entryPoints.http.redirect]
         entryPoint = "https"
     [entryPoints.https]
     address = ":443"
       [entryPoints.https.tls]
   [acme]
   email = "[email protected]"
   storage = "/etc/traefik/acme.json"
   entryPoint = "https"
   onHostRule = true
   [acme.httpChallenge]
   entryPoint = "http"
   

   Replace [email protected] with a valid email address.

4. Save and close the file by pressing Ctrl + X, Y, and Enter.

5. Create a new file named docker-compose.yml in the /etc/traefik directory:

   nano /etc/traefik/docker-compose.yml
   

6. Type or paste the following configuration into the file:

   version: '3'
   services:
     traefik:
       image: traefik
       ports:
         - "80:80"
         - "443:443"
       volumes:
         - "/etc/traefik:/etc/traefik"
         - "/var/run/docker.sock:/var/run/docker.sock"
       restart: always
   

7. Save and close the file by pressing Ctrl + X, Y, and Enter.

8. Start the Traefik container using the following command:

   sudo docker-compose up -d
   

   This command will download and start the Traefik container. You can check that the container is running by executing the following command:

   sudo docker ps
   

   The output should show the Traefik container running.

Congratulations, you have successfully installed Traefik on your EndeavourOS server. You can now use Traefik to manage incoming traffic to your web applications.