Installing NymphCast on Fedora CoreOS

NymphCast is a software solution for streaming media from one device to another. With NymphCast, you can stream video, audio, and even images to devices like TVs and speakers on your local network. In this tutorial, we will guide you through the installation process of NymphCast on Fedora CoreOS latest version.

Prerequisites

  • A system running Fedora CoreOS
  • Basic knowledge of the Linux command line

Step 1: Download the NymphCast Package

First, you need to download the NymphCast package from the official website. To do so, follow the steps below:

  1. Open a terminal on your Fedora CoreOS system by pressing Ctrl + Alt + T

  2. Run the following command to download the NymphCast package:

    $ wget http://nyanko.ws/nymphcast-repo/nymphcast-repo.fc32.noarch.rpm

Step 2: Install the NymphCast Package

Once you have downloaded the NymphCast package, you can install it on your system.

  1. Run the following command to install the NymphCast package:

    $ sudo rpm -i nymphcast-repo.fc32.noarch.rpm

    This command will add the NymphCast repository to your Fedora CoreOS system.

  2. Now, run the following command to install NymphCast:

    $ sudo dnf install nymphcast

Step 3: Start the NymphCast Service

Once NymphCast is installed on your system, you can start the NymphCast service.

  1. Run the following command to start the NymphCast service:

    $ systemctl start nymphcastd

  2. You can also verify the status of the NymphCast service by running the following command:

    $ systemctl status nymphcastd

Step 4: Connect to NymphCast from Your Device

You can access NymphCast from any device on your local network. To do so:

  1. Open a web browser on your device

  2. Enter the IP address of your Fedora CoreOS system followed by port 4040 in the address bar. For example:

    http://<ip_address_of_your_fedora_coreos_system>:4040

  3. You should see the NymphCast web interface, which you can use to stream media to devices on your network.

That's it! You have successfully installed NymphCast on your Fedora CoreOS system and can now start streaming media to devices on your local network.