How to Install Raveberry on Fedora Server Latest

Raveberry is a music player software designed to run on a Raspberry Pi with a touchscreen display. In this tutorial, we will guide you through the installation process of Raveberry on Fedora Server Latest.

Prerequisites

Before installing Raveberry, ensure that you have the following installed and configured:

A Fedora Server Latest installation
Internet connectivity
SSH access to your Fedora Server
Raspberry Pi with a touchscreen display (optional)

Installation Steps

Login to your Fedora Server via SSH.
Install Git using the following command:
```
sudo dnf install git
```

Clone the Raveberry repository from GitHub:

git clone https://github.com/raveberry/raveberry.git

Change to the Raveberry directory:
```
cd raveberry
```
Install the required packages using the following command:
```
sudo ./install.sh
```
This will install all the necessary software packages required by Raveberry.
Configure your audio output device by editing the ~/.asoundrc file:
```
nano ~/.asoundrc
```
Update the file with the following content, replacing hw:0 with the name of your audio device:
```
pcm.!default {
    type hw
    card 0
}
ctl.!default {
    type hw
    card 0
}
```
Save and close the file.
Run Raveberry using the following command:
```
python3 launcher.py
```
This will start the Raveberry application.
If you are running Raveberry on a Raspberry Pi with a touchscreen display, you can enable the touchscreen input by running the following command:
```
sudo modprobe -r hid_multitouch
sudo modprobe uinput
```
This will enable the touchscreen input.

Conclusion

Congratulations! You have successfully installed Raveberry on your Fedora Server. You can now start using Raveberry to play music on your Raspberry Pi. If you encounter any issues, refer to the Raveberry documentation or seek support from the Raveberry community.