Tutorial: How to Install SANE Network Scanning on Fedora Server Latest

SANE (Scanner Access Now Easy) is an application programming interface (API) that provides standardized access to scanner devices. It allows software applications to interface with any scanner that implements the SANE API. In this tutorial, we will cover how to install SANE Network Scanning on a Fedora Server latest version.

Prerequisites

Before you begin this tutorial, ensure that you have the following:

  • A running Fedora Server latest version
  • Internet access
  • A terminal window or SSH connection to your server

Step 1 – Update and Upgrade the System

First, update the repository and upgrade any currently installed packages by running the following command:

sudo dnf update

Step 2 - Install SANE Network Scanning

To install SANE Network Scanning, run the following command:

sudo dnf install sane-backends sane-backends-libs sane-backends-devel

Step 3 - Configure the Network Scanner

To configure your network scanner, you first need to determine its IP address. You can use the nmap command to scan your network for connected devices.

sudo nmap -sP 192.168.0.*

In the above command, replace 192.168.0. with your own network IP address.

After scanning, you should have a list of all devices connected to your network. Look for a device with the manufacturer name of your scanner.

Once you have located your scanner, take note of its IP address.

Step 4 - Add Your Scanner to SANE Configuration

To add your scanner to your SANE configuration, you must edit the sane.d file located at /etc/sane.d/.

Open the file using the following command:

sudo nano /etc/sane.d/net.conf

Add the following line to the file, replacing 192.168.0.100 with your scanner's IP address:

# My Scanner
192.168.0.100

Save and close the file.

Step 5 - Test Your Scanner

To test your scanner, run the following command:

sudo scanimage -L

You should see your scanner listed as an available device.

Congratulations! You have successfully installed SANE Network Scanning on your Fedora Server and configured your network scanner for use.