How to Install 0bin on FreeBSD Latest

0bin is an open-source pastebin service which lets you share confidential information in a secure and encrypted way. This tutorial will guide you through the steps required to install 0bin on FreeBSD.

Prerequisites

Before installing 0bin, there are some prerequisites that must be met:

A FreeBSD Latest system with root access
Python 2.7 or higher installed on your system

Installation

First, download the latest version of 0bin from their GitHub repository:

# fetch https://github.com/Tygs/0bin/archive/master.tar.gz -o 0bin.tar.gz

Extract the downloaded archive:
```
# tar -xzvf 0bin.tar.gz
```
Move the extracted directory to your desired location. For example, if you want to install it in the default location of "/usr/local/www/0bin", run the following command:
```
# mv 0bin-master /usr/local/www/0bin
```
Install the required Python dependencies by running the following command:
```
# pip install -r /usr/local/www/0bin/requirements.txt
```
Configure 0bin by editing the "config.py" file located in the "/usr/local/www/0bin" directory. Customize the configuration to your needs.

Set up the 0bin service to start automatically at system boot by creating a service file. For example, create a new file called "0bin" in the "/usr/local/etc/rc.d/" directory and add the following content:

#!/bin/sh
#
# PROVIDE: 0bin
# REQUIRE: LOGIN DAEMON NETWORKING
# KEYWORD: nojail shutdown
#
# Add the following lines to /etc/rc.conf to enable 0bin:
#
# 0bin_enable="YES"
#
# You will also need to set the following variables:
#
# 0bin_user      (default: www)
# 0bin_group     (default: www)
# 0bin_command   (default: /usr/local/bin/python /usr/local/www/0bin/run.py)
#

. /etc/rc.subr

name="0bin"
rcvar=${name}_enable

load_rc_config $name

: ${0bin_enable:=no}
: ${0bin_user:=www}
: ${0bin_group:=www}
: ${0bin_command:=/usr/local/bin/python /usr/local/www/0bin/run.py}

pidfile="/var/run/${name}.pid"

command="/usr/sbin/daemon -c -P ${pidfile} -f -u ${0bin_user} -g ${0bin_group} ${0bin_command}"
start_cmd="${command} start"
stop_cmd="${command} stop"
status_cmd="${command} status"

run_rc_command "$1"

Make the "0bin" file executable:
```
# chmod +x /usr/local/etc/rc.d/0bin
```
Start the 0bin service by running the following command:
```
# service 0bin start
```
Verify that the 0bin service is running correctly by visiting the URL "http://localhost:8080" in your web browser.

Congratulations! You have successfully installed 0bin on FreeBSD Latest. You can now use it to share confidential information with security and peace of mind.