Sure! Here's a tutorial on how to install Snapcast on FreeBSD Latest:

Step 1: Install dependencies

Before we begin, we need to install some dependencies required for Snapcast to run smoothly. To do this, open a command prompt and type the following command:

sudo pkg install -y gmake gcc sqlite3 avahi-libdns

This command will install the packages necessary for building and running Snapcast.

Step 2: Download Snapcast

Next, we need to download the Snapcast source code from GitHub. To do this, type the following command:

git clone https://github.com/badaix/snapcast.git

This will create a directory "snapcast" in the current working directory.

Step 3: Build Snapcast

Now, we can compile and build Snapcast. Navigate to the "snapcast" directory by typing:

cd snapcast

Then, run the following commands:

qmake
gmake

This will compile and build the Snapcast binary. It may take some time, so be patient.

Step 4: Install Snapcast

Once Snapcast is built, we can install it. To do this, type the following command:

sudo gmake install

This will copy the Snapcast binary and required files to your system.

Step 5: Configure Snapcast

Now that Snapcast is installed, we need to configure it to fit our needs. Snapcast configuration is stored in a file called "snapserver.conf". To create this file, type:

sudo cp snapserver.conf.sample /usr/local/etc/snapserver.conf

This will create a default configuration file in "/usr/local/etc/snapserver.conf". Now, open this file with your preferred text editor and make any necessary changes to the configuration.

Step 6: Run Snapcast

Finally, we're ready to run Snapcast! Type the following command to start the Snapcast server:

sudo snapserver

If everything is configured correctly, Snapcast should start running and you should be able to connect to it with a Snapcast client.

That's it! You have successfully installed and configured Snapcast on your FreeBSD Latest system.