How to Install WeeWX on FreeBSD Latest

WeeWX is a weather station software that runs on various operating systems like FreeBSD. In this tutorial, we'll discuss the steps to install WeeWX on FreeBSD latest.

Prerequisites

Before starting with the WeeWX installation, make sure that you have the following prerequisites:

  • FreeBSD latest installed on your system
  • Root privileges to install packages and run commands
  • Stable internet connection

Step 1: Install Required Dependencies

Before installing WeeWX on FreeBSD, we need to install some required dependencies for WeeWX to run correctly. Here are the commands you can use:

pkg update && pkg install python3 py38-setuptools py38-configobj py38-pillow py38-serial py38-usb

This command will update your package manager and install the required dependencies.

Step 2: Download and Install WeeWX

After installing the required dependencies, we can now download and install WeeWX. Here are the commands you can run:

cd /tmp
fetch http://www.weewx.com/downloads/weewx-4.5.1.tar.gz
tar -xzvf weewx-4.5.1.tar.gz
cd weewx-4.5.1
sudo python3 setup.py install

By running these commands, we've downloaded WeeWX's latest version, extracted the archive, and installed the software on our system.

Step 3: Configure WeeWX

After installing WeeWX, we need to set up its configuration file. WeeWX's configuration file is located at /home/weewx/weewx.conf. Here are the commands you can run to configure WeeWX:

cd /home/weewx
sudo cp weewx.conf.4.5.1 weewx.conf
sudo nano weewx.conf

The above commands will copy the default configuration file and rename it to weewx.conf. Then, it will open the configuration file in a text editor called nano. In the configuration file, make sure to configure the following fields:

  • [Station]: Enter the station's name, coordinates, and altitude.
  • [StdRESTful]: Configure the RESTful service details. This is required to push the weather data to external services like Weather Underground or CWOP.
  • [DataBindings]: Configure the type of weather station you have.

After configuring the WeeWX's configuration file, save the file and exit.

Step 4: Verify WeeWX Installation

After configuring WeeWX, we can now verify if WeeWX is working correctly. Here are the commands you can run to check the WeeWX installation:

sudo /etc/rc.d/weewx start
sudo tail -f /var/log/weewx.log

The first command will start the WeeWX service, and the second command will tail the WeeWX's log file. You should see the log file being updated with weather data.

Conclusion

By following this tutorial, you've learned how to install WeeWX on FreeBSD. We've also seen the configuration process and how to verify that WeeWX is running correctly.