How to Install NetXMS on MXLinux

These are the steps to installing NetXMS on MXLinux.

Step 1: Installation of Required Dependencies

First, we need to install the required dependencies for installing NetXMS in MXLinux. Open up the terminal and enter the following command.

sudo apt-get install -y libcurl4-openssl-dev libssl-dev cmake make g++

This command will install the necessary dependencies for installing NetXMS.

Step 2: Download the NetXMS Package

Next, we need to download the NetXMS package from the official website. Run the following command to download the package.

wget https://www.netxms.org/download/releases/latest/netxms-2.2.21.tar.gz

This will download the NetXMS package in your Downloads folder.

Step 3: Extracting the Package

Now, we need to extract the downloaded package. Move to the Downloads folder using the following command.

cd ~/Downloads/

After that, extract the package using the following command.

tar xzf netxms-2.2.21.tar.gz

This will extract the package contents into a folder named netxms-2.2.21.

Step 4: Compiling and Installing NetXMS

Now, we need to compile and install NetXMS on MXLinux. Move to the extracted folder using the following command.

cd netxms-2.2.21

After that, run the following commands to compile and install NetXMS.

./configure --enable-server --with-openssl
make
sudo make install

This will configure, compile, and install NetXMS on your MXLinux machine.

Step 5: Starting the NetXMS Server

Once installation is complete, we can start the NetXMS server. Run the following command to start the server.

sudo netxmsd start

This will start the NetXMS server on your MXLinux machine.

Conclusion

That's it! We have successfully installed NetXMS on MXLinux. Now you can monitor your devices and network using NetXMS.