How to Install dnsmasq on MXLinux Latest

Dnsmasq is a lightweight DNS and DHCP server. In this tutorial, we will go through the process of installing dnsmasq on the latest version of MXLinux.

Prerequisites

• MXLinux Latest installed on your PC or virtual machine
• Internet connection

Step 1: Update your system

Before installing any software on your system, it is necessary to have your MXLinux system up-to-date. To update your system, open the terminal and run the following command:

sudo apt update && sudo apt upgrade

It will prompt you for the admin password.

Step 2: Install dnsmasq

To install dnsmasq on MXLinux, run the following command in the terminal:

sudo apt install dnsmasq

The command will download and install the dnsmasq package along with its dependencies.

Step 3: Configuration

The default configuration for dnsmasq on MXLinux is stored in the /etc/dnsmasq.conf file. You can edit this file to configure the DNS and DHCP settings.

Before you start making any changes, it is recommended to make a backup of the initial configuration file using the following command:

sudo cp /etc/dnsmasq.conf /etc/dnsmasq.conf.bak

Step 4: Enable dnsmasq service

To enable the dnsmasq service, run the following command:

sudo systemctl enable dnsmasq

This command will start the dnsmasq service and set it to autostart at boot.

Step 5: Verify dnsmasq installation

To verify that dnsmasq is installed correctly, you can check the service status by running the following command:

sudo systemctl status dnsmasq

If dnsmasq is running without any errors, you will see the status as active.

Conclusion

Congratulations! You have successfully installed dnsmasq on your MXLinux system. You can now configure the service settings and enjoy its DNS and DHCP functionalities.