Installing easy-rsa from Github on MXLinux

This tutorial will guide you through the process of installing easy-rsa, a simple utility for managing a Public Key Infrastructure used to implement virtual private networks, from Github on MXLinux.

Prerequisites

Before starting with the installation, make sure that you have the following requirements met:

MXLinux installed on your system.
Access to the terminal with sudo privileges.
Active internet connection.

Installing Easy-RSA from Github

Easy-RSA can be installed from the MXLinux repository but in this tutorial we will install it using Github. Here are the steps:

Open the terminal by pressing Ctrl+Alt+T.
Update the package repository index by running:
```
sudo apt update
```
Install the Git package to download the source code from Github.
```
sudo apt install git
```
Switch to the /usr/share directory by running:
```
cd /usr/share
```

Clone the easy-rsa repository from Github.

sudo git clone https://github.com/OpenVPN/easy-rsa.git

Navigate to the cloned directory by running:
```
cd easy-rsa/easyrsa3
```
Make the easyrsa file executable by running:
```
sudo chmod +x easyrsa
```
Verify that the installation was successful by running:
```
./easyrsa
```

You should now see the easy-rsa usage instructions.

Congratulations! You have successfully installed easy-rsa from Github on MXLinux.