How to Install sist2 on MXLinux Latest

sist2 is a Python-based toolbox for Image Stitching. In this tutorial, we will guide you through the process of installing sist on MXLinux Latest using the following steps:

Prerequisites

• Make sure you have MXLinux Latest installed on your system.
• You need to install Python 3.6 or higher.
• Git must be installed and configured on your system.

Step 1 - Install git

First, we need to install git on your system using the following command:

sudo apt-get install git

Step 2 - Clone sist2 from Github

Next, clone sist2 from Github using the following command:

git clone https://github.com/simon987/sist2.git

Step 3 - Install Dependencies

Now, you need to install the required dependencies for sist2. You can do this by running the following command in your terminal:

sudo apt-get install python3-dev python3-numpy python3-pil python3-tk python3-venv

Step 4 - Create a Virtual Environment

It is always best to create a virtual environment before installing any Python packages. To create a virtual environment, run the following command in the terminal:

python3 -m venv env

This will create a virtual environment named "env" in your current directory.

Step 5 - Activate the Virtual Environment

To activate the virtual environment, run the following command:

source env/bin/activate

Step 6 - Install sist2

Now, navigate to the sist2 directory and install sist2 using the following command:

pip install .

This command will install the required packages for sist2.

Step 7 - Test the Installation

Finally, to test that everything is working correctly, run the following command:

python3 -m sist2.sist

If you see the sist2 GUI, then you have successfully installed sist2 on MXLinux Latest.

Conclusion

In this tutorial, we have shown you how to install sist2 on MXLinux Latest. By following these steps, you can now use sist2 for Image Stitching.