How to Install Raveberry on Manjaro

Raveberry is an open-source music player that you can install on a Raspberry Pi. If you're using Manjaro Linux, you can use the following steps to install Raveberry on your system.

Prerequisites

Before getting started, ensure that:

• You have a Raspberry Pi board.
• You have installed Manjaro Linux on your Raspberry Pi.
• You have an active internet connection.

Step 1: Update Your System

Begin by updating your system using the following commands:

sudo pacman -Syu

This command will update your system and install any pending updates.

Step 2: Install Dependencies

Raveberry requires several dependencies for it to function correctly. You can install them using the following command:

sudo pacman -S python python-pip mpd mpc sqlite

Step 3: Clone the Raveberry Repository

You can clone the Raveberry repository on your Raspberry Pi using the following command:

git clone https://github.com/raveberry/raveberry.git

Step 4: Install Raveberry

To install Raveberry on your system, run the following commands:

cd raveberry
sudo python setup.py install

Step 5: Configure Raveberry

After installing Raveberry, you will need to configure it. You can do this by running the following command:

raveberry-setup

This command will launch the Raveberry configuration wizard, where you can set up the music library, media directories, and other features.

Step 6: Start Raveberry

To run Raveberry on your Raspberry Pi, use the following command:

raveberry start

This command will start the Raveberry service and play music from your configured music library.

Conclusion

That's it! You have successfully installed Raveberry on your Manjaro system. You can now enjoy your favorite music directly from your Raspberry Pi.