Installing ICEcoder on NetBSD

In this tutorial, we will guide you through step-by-step instructions to install ICEcoder on NetBSD.

Prerequisites

  • A NetBSD server running on your machine.
  • An SSH client like PuTTY to connect to your server.

Step 1 - Download and Extract ICEcoder

  1. Open your SSH client and connect to your NetBSD server.
  2. Download the latest version of ICEcoder using the following command:
wget https://github.com/icecoder/ICEcoder/archive/master.zip
  1. After the download is complete, extract the downloaded zip file using the following command:
unzip master.zip
  1. Once the extraction is complete, navigate to the ICEcoder directory using the cd command:
cd ICEcoder-master

Step 2 - Install ICEcoder

  1. Run the ICEcoder installer using the following command:
sh install-icecoder.sh

  1. After running the installer, you will be prompted to enter your preferred port number, SSL configuration, and default username and password for ICEcoder.

  2. Once the installation is complete, start the ICEcoder service using the following command:

sh start-icecoder.sh
  1. Verify the installation by accessing ICEcoder in your web browser, using the server address and port number you configured during installation. The default address should be http://IP_ADDRESS:PORT_NUMBER/.

Congratulations! You have successfully installed and configured ICEcoder on NetBSD.