How to Install OpenVZ on NetBSD

OpenVZ is a container-based virtualization system that allows multiple isolated virtual environments to run on a single physical server. It is free and open-source and can be installed on NetBSD.

In this tutorial, we will guide you through the process of installing OpenVZ on NetBSD.

Prerequisites

Before starting the installation, make sure your NetBSD system meets the following requirements:

  • NetBSD 7.0 or later
  • A 64-bit processor
  • At least 4 GB of RAM
  • A stable internet connection

Step 1: Install Required Packages

First, you need to install the required packages for OpenVZ. These packages include:

  • git
  • gcc
  • make
  • kernel-source

To install these packages, run the following command:

pkgin update
pkgin install git gcc make kernel-source

Step 2: Clone OpenVZ Repository

Next, you need to clone the OpenVZ repository from Github. To do this, run the following command:

git clone https://github.com/openvz/openvz.git

Step 3: Configure Kernel

Once the OpenVZ repository is cloned, you need to configure the kernel by running the following command:

cd openvz/kernel
make config

The above command will open the kernel configuration menu. Here, you need to perform the following steps:

  • Press "Enter" to accept the default settings
  • Press "Esc" to exit the configuration menu
  • Save the configuration changes

Step 4: Build and Install Kernel

After configuring the kernel, you need to build and install it by running the following commands:

make
make install

Step 5: Reboot System

Once the kernel is installed, you need to reboot your system by running the following command:

reboot

Step 6: Install OpenVZ Tools

After the system reboots, log in to your NetBSD system and install the OpenVZ tools by running the following command:

cd openvz/utils
make
make install

Step 7: Test OpenVZ

Finally, you can test your OpenVZ installation by starting a container by running the following command:

vzctl create <container name> --ostemplate <template name>

This command will create a new container using the specified template. You can start the container by running the following command:

vzctl start <container name>

To access the container, run the following command:

vzctl enter <container name>

You have successfully installed and tested OpenVZ on your NetBSD system. Congratulations!