Installing Raveberry on NetBSD

Raveberry is an open source project that lets you create a portable, standalone music player using a Raspberry Pi and a touchscreen display. In this tutorial, we will guide you on how to install Raveberry on NetBSD.

Requirements

  • Raspberry Pi with Raspbian installed
  • Touchscreen display
  • Internet connection

Installation Steps

  1. Login to your Raspberry Pi and open up a terminal.

  2. Install git by running the following command:

sudo apt-get update
sudo apt-get install git
  1. Clone the Raveberry repository and change into the directory:
git clone https://github.com/raveberry/raveberry.git
cd raveberry
  1. Install dependencies using the following command:
sudo apt-get install libasound2-dev libssl-dev libgles2-mesa-dev libgbm-dev libdrm-dev libinput-dev libxkbcommon-dev
  1. Run the following command to start the Raveberry setup:
sudo ./setup.sh

  1. Follow the on-screen instructions to configure the Raveberry setup.

  2. Once the setup is complete, start the Raveberry service using the following command:

sudo systemctl start raveberry.service
  1. Open a web browser and navigate to http://localhost:8080 to access the Raveberry interface.

Congratulations! You have successfully installed Raveberry on your NetBSD system. Enjoy your new portable music player!