How to Install GoSƐ on OpenBSD

GoSƐ is a tool for monitoring and tracking system calls in real-time. It is an open-source project available on GitHub. In this tutorial, we will guide you through the step-by-step process of installing GoSƐ on an OpenBSD system.

Prerequisites

Before we begin, make sure your OpenBSD system meets the following requirements:

• OpenBSD 6.6 or later
• Administrator privileges

Step 1: Install Dependencies

GoSƐ requires two dependencies to be installed on your OpenBSD system. You can install these dependencies by running the following command:

$ sudo pkg_add libelf libffi

This command will install the libelf and libffi packages required by GoSƐ.

Step 2: Download GoSƐ

You can download GoSƐ from its GitHub repository. To download it, run the following command:

$ git clone https://github.com/stv0g/gose.git

This will download the GoSƐ source code and save it to a new directory called gose.

Step 3: Build GoSƐ

Once you have downloaded GoSƐ, you will need to build it. Change the directory to the gose directory using the following command:

$ cd gose

Next, build GoSƐ by running the following command:

$ make

This command will build GoSƐ using the Makefile in the gose directory. It may take a few minutes to complete.

Step 4: Install GoSƐ

After GoSƐ has been built, you can install it on your system by running the following command:

$ sudo make install

This will install GoSƐ to the /usr/local/bin directory on your system.

Step 5: Test GoSƐ

To test if GoSƐ has been installed successfully, run the following command:

$ gose -h

This command will display the help menu for GoSƐ, which confirms that it has been installed successfully.

Conclusion

With GoSƐ successfully installed on your OpenBSD system, you can now use it to monitor and track system calls in real-time. In this tutorial, we guided you through the process of installing GoSƐ on an OpenBSD system step-by-step.