Installing MokinToken on OpenBSD

MokinToken is a blockchain-based platform that enables private, secure, and fast transactions. This tutorial provides step-by-step instructions on how to install MokinToken on OpenBSD.

Prerequisites

Before getting started, you should have the following:

  • A machine running OpenBSD
  • At least 2GB of RAM and 1CPU
  • Basic knowledge of the command line interface

Installation

Step 1: Install Git

Git is a distributed version control system that allows you to download the MokinToken repository from GitHub. To install Git, run the following command:

$ sudo pkg_add git

Step 2: Clone the MokinToken repository

To clone the MokinToken repository, run the following command:

$ git clone https://github.com/nexus-uw/mokintoken.git

This will create a new directory called mokintoken in your current working directory.

Step 3: Install dependencies

MokinToken requires several dependencies to work properly. To install these dependencies, run the following command:

$ sudo pkg_add autoconf automake libtool gcc g++ libevent-dev libssl-dev libboost-dev libboost-system-dev libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev libconfig-dev libdb++-dev

Step 4: Build and install MokinToken

To build MokinToken, navigate to the mokintoken directory and execute the following commands:

$ cd mokintoken
$ ./autogen.sh
$ ./configure
$ make
$ sudo make install

This will build MokinToken and install it into your system.

Step 5: Configure MokinToken

To configure MokinToken, navigate to the mokintoken directory and execute the following command:

$ cd mokintoken
$ nano mokintoken.conf

This will open the MokinToken configuration file in the Nano text editor. Here, you can configure several settings, including the port number, the IP address, and the passphrase. Make the necessary changes and save the file.

Step 6: Launch MokinToken

To launch MokinToken, navigate to the mokintoken directory and execute the following command:

$ cd mokintoken
$ ./mokintokend

This will start MokinToken and you should see some output in your terminal.

Step 7: Verify Installation

To verify that MokinToken is running, open a web browser and navigate to http://localhost:59999. If everything is working correctly, you should see a MokinToken web interface.

Congratulations! You have successfully installed and launched MokinToken on OpenBSD.