How to Install NymphCast on OpenSUSE

Introduction

NymphCast is an open-source software that allows you to stream media over your local network. This tutorial will show you how to install NymphCast on OpenSUSE.

Prerequisites

Before starting, make sure you have the following:

• OpenSUSE installed on your system.
• A stable internet connection.

Step 1: Enable Repository

• Open the terminal by pressing Ctrl+Alt+T.

• Type the command below to add the repository:

  sudo zypper addrepo --refresh http://download.opensuse.org/repositories/home:nyankov/openSUSE_Leap_15.2/home:nyankov.repo
  

• Press Enter to execute the command.

Step 2: Install NymphCast

• Type the following command to install NymphCast:

  sudo zypper install nymphcast
  

• Press Enter to execute the command.

Step 3: Start NymphCast

• Type the following command to start the service:

  sudo systemctl start nymphcast
  

• Press Enter to execute the command.

Step 4: Enable NymphCast on Boot

• Type the following command to enable the service to start automatically on boot:

  sudo systemctl enable nymphcast
  

• Press Enter to execute the command.

Step 5: Verify NymphCast

• Type the following command to verify if NymphCast is running:

  sudo systemctl status nymphcast
  

• Press Enter to execute the command.

• If the service is running, you should see a message indicating that the service is active.

Conclusion

Congratulations! You have successfully installed NymphCast on OpenSUSE. You can now use it to stream media over your local network.