How to Install WeeWX on POP! OS Latest

WeeWX is a free, open source software that allows you to collect, archive, and view weather data from your personal weather station. In this tutorial, we will explain how to install WeeWX on POP! OS, a Linux distribution based on Ubuntu.

Prerequisites

Before you begin, make sure you have the following:

  • A working installation of POP! OS (version 20.04 or later).
  • A personal weather station (PWS) that is compatible with WeeWX.
  • Basic knowledge of the Linux command line.

Step 1: Install WeeWX

To install WeeWX on your POP! OS system, follow these steps:

  1. Open a terminal window by pressing ctrl + alt + T.

  2. Type the following command to add the WeeWX repository to your system:

     sudo apt-add-repository -y ppa:weewx.com/releases

  3. Update the package list by running:

     sudo apt-get update

  4. Install WeeWX by typing:

     sudo apt-get install weewx

  5. During the installation process, you will be asked to configure WeeWX. Follow the prompts to set up your PWS device and any relevant settings.

Step 2: Configure WeeWX

After the installation is complete, you will need to configure WeeWX to suit your needs. Here's how:

  1. Open the WeeWX configuration file in a text editor:

     sudo nano /etc/weewx/weewx.conf

  2. Navigate through the file and modify any settings as needed. For example, you may want to change the location of the data archives or adjust the reporting intervals.

  3. Save the file and exit the text editor.

  4. Restart WeeWX to apply the changes:

     sudo /etc/init.d/weewx stop
 sudo /etc/init.d/weewx start

Step 3: Access WeeWX

Now that WeeWX is installed and configured, you can access your weather data by visiting the local web server that comes with WeeWX. Here's how:

  1. Open a web browser and go to http://localhost/weewx. You should see the WeeWX dashboard with your weather data displayed.

  2. If you need to access your weather data from another device on the same network, use the IP address of your POP! OS system and add "/weewx" to the end. For example:

     http://192.168.1.100/weewx

Conclusion

That's it! You have successfully installed WeeWX on your POP! OS system and configured it to collect weather data from your personal weather station. We hope this tutorial was helpful. For more information about WeeWX, visit their website at https://weewx.com/.