How to Install LibreServer on Void Linux

LibreServer is an open-source server management tool which can be easily installed on Void Linux by following these steps:

Prerequisites

Before we begin, make sure that your system has the following:

We need to install some dependencies on our Void Linux system. Run the following command in your terminal:

sudo xbps-install -S git python3 python3-pip python3-setuptools python3-wheel proxychains-ng

Clone the LibreServer repository from Github using the following command:

git clone https://github.com/Libreserver/libreserver.git

Once the clone is complete, navigate to the LibreServer directory:

cd libreserver

Install LibreServer using pip by running the following command:

sudo pip3 install -r requirements.txt

To configure LibreServer, you need to edit config.py file:

nano config.py

Change the default username and password in the config.py file to a strong password.

To start LibreServer, run the following command:

proxychains4 python3 manager.py run

If all goes well, you should see the following message:

* Restarting with stat
* Debugger is active!
* Debugger PIN: ***
* Running on http://0.0.0.0:8000/ (Press CTRL+C to quit)

Open your web browser and enter the IP address followed by port number 8000 in the address bar:

http://server-ip-address:8000/

You should be able to log in with the username and password you set in the config.py file.

Congratulations! You have successfully installed LibreServer on your Void Linux system. You can now use it to manage your server seamlessly.