How to Install Raveberry on Void Linux

Raveberry is an open-source software that allows you to create your own music player with a Raspberry Pi and control it through a mobile application. In this tutorial, we will be installing Raveberry on Void Linux.

Prerequisites

Before installing Raveberry, you need to make sure you have the following prerequisites installed on your system:

• Raspberry Pi connected to the internet
• Void Linux installed on Raspberry Pi
• SSH access to the Raspberry Pi

Installation Steps

1. Open a terminal window on your computer and SSH into your Raspberry Pi:

   ssh user@ipaddress
   

   Replace user with your username and ipaddress with the IP address of your Raspberry Pi.

2. Install the required packages:

   sudo xbps-install -S git make gcc patch
   

3. Clone the Raveberry repository:

   git clone https://github.com/raveberry/raveberry.git
   

4. Change to the Raveberry directory:

   cd raveberry
   

5. Build Raveberry:

   make
   

6. Install Raveberry:

   sudo make install
   

7. Start the Raveberry service:

   sudo systemctl start raveberry
   

8. Enable the Raveberry service to start at boot:

   sudo systemctl enable raveberry
   

Congratulations! You have successfully installed Raveberry on Void Linux. You can now control your music player using the Raveberry mobile application.