How to Install SIP Irrigation Control on Void Linux

SIP Irrigation Control is a web-based irrigation control system that allows you to automate and monitor your garden irrigation system. In this tutorial, we will be installing SIP Irrigation Control on Void Linux.

Before You Begin

Before we proceed, make sure that you have the following:

• A working Void Linux installation
• Internet connection
• Basic knowledge of the command line

Step 1: Install Required Packages

Open the terminal and run the following command to update the system:

sudo xbps-install -Suv

Once the system is updated, we need to install the following packages:

sudo xbps-install -y python3 python3-pip git

Step 2: Clone the SIP Repository

Next, we need to clone the SIP repository using the following command:

git clone https://github.com/Dan-in-CA/SIP.git

This command will clone the SIP repository to the current directory.

Step 3: Install the Required Python Modules

Change the directory to the SIP directory by running the following command:

cd SIP

Next, install the required Python modules using the following command:

sudo pip3 install -r requirements.txt

Step 4: Start the SIP Server

Finally, start the SIP server using the following command:

python3 start.py

This will start the SIP server on port 8081. You can access the SIP web interface by opening your browser and entering the following address:

http://localhost:8081

Conclusion

In this tutorial, we have learned how to install SIP Irrigation Control on Void Linux. With SIP, you can automate and monitor your garden irrigation system from a web interface.