How to install DD-WRT on macOS

DD-WRT is a popular open-source firmware that unlocks your router's full capabilities. In this tutorial, we'll show you how to install DD-WRT on your router using macOS.

Prerequisites

• A router compatible with DD-WRT (check the DD-WRT router database for compatibility)
• A Mac running macOS 10.7 or later
• An ethernet cable

Steps

1. Download the latest firmware from the DD-WRT website.

2. Connect your Mac to your router using an ethernet cable.

3. Open a web browser and navigate to your router's IP address (usually 192.168.1.1 or 192.168.0.1).

4. Login to your router. The username and password are usually located on the back of the router or in the manual.

5. Navigate to the firmware update section of your router's web interface. The exact location will vary depending on your router model.

6. Upload the DD-WRT firmware that you downloaded in step 1.

7. Wait for the firmware to upload and install. This may take a few minutes.

8. Once the installation is complete, navigate to the DD-WRT web interface by going to the IP address of your router in a web browser.

9. Login to the DD-WRT interface using the default username "root" and password "admin".

10. Congratulations, you have successfully installed DD-WRT on your router.

Conclusion

DD-WRT is a powerful firmware that unlocks the full potential of your router. With this tutorial, you can easily install DD-WRT on your router using your Mac. Enjoy your new and improved router!