How to Install DietPi on NixOS Latest

DietPi is a lightweight operating system designed for single-board computers, such as Raspberry Pi, ODROID, and others. It is known for its pre-configured software packages and easy-to-use setup. In this tutorial, we will show you how to install DietPi on NixOS Latest.

Prerequisites

Before we proceed with the installation, you need to ensure that your NixOS Latest system is up-to-date. You can update your system by running the following command:

sudo nix-channel --update
sudo nixos-rebuild switch

Steps

  1. First, download the DietPi ISO image from the official website: https://dietpi.com/. You can choose the appropriate image for your system architecture.

  2. Create a bootable USB drive with the DietPi ISO image. You can use the "dd" command to write the image to a USB drive. For example:

sudo dd if=dietpi.img of=/dev/sdb bs=4M conv=fdatasync status=progress

Note that "/dev/sdb" should be replaced with the corresponding device name of your USB drive.

  1. Insert the bootable USB drive and reboot your system. Press the appropriate key to enter the BIOS or UEFI boot menu and select the USB drive to boot from.

  2. Once the DietPi installer starts, follow the prompts to configure your system. You can choose your preferred options, such as system language, timezone, keyboard layout, and network settings.

  3. When prompted to select the installation mode, choose "Basic Installation" for a minimal system or "Custom Installation" for a more complete system with additional software packages.

  4. After the installation is complete, remove the USB drive and reboot your system. You should now have a running DietPi system on your NixOS Latest machine.

Conclusion

In this tutorial, we have shown you how to install DietPi on NixOS Latest. DietPi is a lightweight and easy-to-use operating system designed for single-board computers, and it can be a great choice for your NixOS Latest system as well.