How to Install Traccar on NixOS Latest

Traccar is an open-source GPS tracking system that allows you to track your vehicles, assets, or people easily. Installing Traccar on NixOS is a straightforward process that can be completed in a few simple steps.

Prerequisites

Before you start, you need to have NixOS installed on your system. You should also have a basic understanding of how to use the command line.

Step 1: Add the Traccar package to configuration.nix

The first step in installing Traccar on NixOS is to add the Traccar package to the configuration.nix file. To do this, open a terminal window and enter the following commands:

$ sudo nano /etc/nixos/configuration.nix

This command will open the configuration.nix file in the nano text editor. Scroll down to the environment.systemPackages section and add the following line:

traccar

Save and close the file by pressing CTRL + X, then typing Y, and pressing ENTER.

Step 2: Update NixOS

Next, update NixOS to ensure that the Traccar package is installed properly. To do this, enter the following command in the terminal:

$ sudo nixos-rebuild switch

This command will rebuild and reload the system configuration, including the Traccar package.

Step 3: Configure Traccar

After installing the Traccar package, you need to configure it to start automatically when the system boots. To do this, create a service file in the /etc/systemd/system directory. Enter the following command to create the file:

$ sudo nano /etc/systemd/system/traccar.service

Next, copy and paste the following text into the file:

[Unit]
Description=Traccar GPS Tracking System
After=network.target

[Service]
Type=simple
User=traccar
ExecStart=/opt/traccar/bin/traccar start
ExecStop=/opt/traccar/bin/traccar stop

[Install]
WantedBy=multi-user.target

This service file will tell the system to start the Traccar service when it boots up.

Step 4: Start and Enable Traccar

Finally, start and enable the Traccar service by entering the following commands in the terminal:

$ sudo systemctl start traccar.service
$ sudo systemctl enable traccar.service

These commands will start the Traccar service and configure it to start automatically when the system boots up.

Conclusion

In this tutorial, we have shown you how to install Traccar on NixOS using simple steps. Once you have installed Traccar, you can easily track your vehicles, assets, and people using the GPS tracking system.